ID6NL Insight multi-deck critical temp case for produce.

ID6NL Insight multi-deck Hussmann critical temp case for produce.

45,000 square foot of GreenSpan MesaLine panels for a cold storage warehouse

CrownTonka display cooler with a white 26 gauge finish. Krack Low profile coils. Styleline 30 x 80 CL HH glass doors designed to work in ambient conditions up to 75 degrees and 85% relative humidity. Picture taken prior to store opening.

CrownTonka display cooler with a white 26 gauge finish. Krack Low profile coils. Styleline 30 x 80 CL HH glass doors designed to work in ambient conditions up to 75 degrees and 85% relative humidity. Picture taken prior to store opening.

52’ IDD6SU multi deck dairy behind French doors. French doors are an energy saver, provide great lighting, and allow merchandisers to display on a 4’ shelf.

Hussmann 52’ IDD6SU multi deck dairy behind French doors. French doors are an energy saver, provide great lighting, and allow merchandisers to display on a 4’ shelf.

Styleline CL NT 30” x 80” cooler doors to maximize product facings and merchandising.

Make it stand out

2 Hussmann TY3-6 x 16’ Entyce produce island cases with a set of 6 (30 x 80) RM NT cooler glass display doors in the background

Protoaire split suction refrigeration system. The condenser is designed into the Protoaire to reduce refrigerant charge. Great application for smaller format stores.

Protoaire split suction refrigeration system. The condenser is designed into the Protoaire to reduce refrigerant charge. Great application for smaller format stores.

Glycol medium temp multi deck cases along with an FI coffin case with lids.

Glycol medium temp multi deck Hussmann cases along with an FI coffin case with lids.

40’ x 20’ x 14’ CrownTonka storage cooler with an 8’x8’ RollSeal door and Krack center mount evaporators

Construction phase of a 13,000 square foot cold storage freezer with 5” thick panels.

Construction phase of a 13,000 square foot cold storage freezer with 5” thick panels.

1 x 3 575 RPM air cooler Krack condenser.

1 x 3 575 RPM air cooler Krack condenser.

ICS one piece, soft nose walk in box. The box is assembled, condensing unit and evaporator mounted at the factory, and shipped on a flatbed. A crane is used to offload. Once the box is set, flashing is installed and an electrician starts up the system. In all, it typically is less than half a day of labor.

Q4-BV Bakery service case.

Hussmann Q4-BV Bakery service case.

 

Q3-MV Jewelry style service meat case

 

Outdoor Protocol. Condenser mounted above on frame at the factory.

 

36” x 84” HDD Pass thru beer cave door with GraphX images

 

Panoramic view of the interior of a 60’ x 45’ x 14’ CrownTonka display freezer during construction. 30” x 80” RM LT Styleline doors on 3 sides. Custom internal supports added due to the number of doors and the large openings.

30’ CR3D Hussmann service zone top and self service bottom